oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if70.01m-119a 70.1 mhz if saw filter 19.0mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if70.01m-119a january 2011 rev a 70.1 mhz if saw filter 19.0mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1= 82 nh, l2= 470 nh output l3= 82 nh source/load impedance 50 ?
oscilent part number 835-if70.01m-119a january 2011 rev a 70.1 mhz if saw filter 19.0mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 70.05 70.1 70.15 insertion loss at fo db - 23.5 24.5 amplitude ripple variation db p-p - 0.65 1.0 group delay variation nsec - 50 100 absolute delay at fo sec - 3.27 - temperature coefficient ppm/c - -72 - bandwidth at ?1.0 db mhz - 19.0 - bandwidth at ?3.0 db mhz 19.1 19.2 - bandwidth at ?50.0 db mhz - 20.18 20.23 ultimate rejection db 50 55 - relative attenuation(fo10mhz) db - 33 -
oscilent part number 835-if70.01m-119a january 2011 rev a 70.1 mhz if saw filter 19.0mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|